Seating the new, larger leadscrew in the bicep

Gael quite rightly suspected that the new, stronger lead screw I developed for the bicep would clash when it tried to seat in the recess in bottom of the RotGear.  Raising the hole that the thrust collar axis seats in by 11.5 mm sorted that problem out quite prettily.

Here you can see the revised HighArmSide part that supports the thrust collar.  I've overlaid the revised design over the old.  As you can see the new mounting hole has been moved upward a bit.  I simply plugged the old hole and cut a new one in the STL file.

Here is the forearm at full extension.

Contracting the forearm towards the bicep at the elbow.

Fully contracted, the lead screw slides into the recess in the bottom of the RotGear which allows the bicep to rotate in a perpendicular plane to its axis.

A closer view.

Removing RotGear you can see the lead screw seated where the recess in the bottom of the RotGear is.

A closer look.

Working on the Inmoov forearm/bicep actuator.

Gael Langevin's Inmoov robot uses a lead screw/thrust collar arrangement to move the forearm with respect to the bicep. He has noted that the lead screws are rather fragile and has, apparently, bought steel replacements.  I've priced lead screws and thrust collars and they are a substantial expense.  Given the goal of keeping the InMoov robot inexpensive it would seem that we should have another look at the notion of printing a lead screw.

While trying to get the servo for the elbow joint going I discovered that the 12.5 mm lead screw printed in ABS tended to suffer a shear failure in extension quite easily if you didn't have the potentiometer and servo settings just right.  After I'd broken three of them, I decided to take a crack at seeing if I could design a more robust lead screw with a larger cross section that would resist shear failures better.

I finally got a working model going this morning.  The cross sectional area of the screw is about 4.75 times larger than the 12.5 mm original. Basically, doubled the diameter of the lead screw and doubled the diameter.